View 2SD1772A_311024.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Power Transistors
2SD1772, 2SD1772A
Silicon NPN triple diffusion planar type
For power amplification For TV vertical deflection output Complementary to 2SB1192 and 2SB1192A
Unit: mm
0.70.1 10.00.2 5.50.2 2.70.2 4.20.2 3.10.1 1.40.1 1.30.2 0.5 +0.2 -0.1 0.80.1 2.540.25 5.080.5 1 2 3 4.20.2
q q
Large collector power dissipation PC Full-pack package which can be installed to the heat sink with one screw (TC=25C)
Ratings 200 200 150 180 6 2 1 25 2 150 -55 to +150 Unit V
16.70.3 14.00.5
Parameter Collector to base voltage Collector to 2SD1772 2SD1772A 2SD1772
Symbol VCBO VCEO VEBO ICP IC PC Tj Tstg
emitter voltage 2SD1772A Emitter to base voltage Peak collector current Collector current Collector power TC=25C dissipation Ta=25C Junction temperature Storage temperature
V V A A W C C
Solder Dip
s Absolute Maximum Ratings
4.0
7.50.2
s Features
1:Base 2:Collector 3:Emitter TO-220 Full Pack Package(a)
s Electrical Characteristics
Parameter Collector cutoff current Emitter cutoff current Collector to emitter voltage 2SD1772 2SD1772A
(TC=25C)
Symbol ICBO IEBO VCEO VEBO hFE1* hFE2 VBE VCE(sat) fT Cob Conditions VCB = 200V, IE = 0 VEB = 4V, IC = 0 IC = 5mA, IB = 0 IE = 0.5mA, IC = 0 VCE = 10V, IC = 100mA VCE = 10V, IC = 300mA VCE = 10V, IC = 300mA IC = 500mA, IB = 50mA VCE = 10V, IC = 100mA, f = 1MHz VCB = 10V, IE = 0, f = 1MHz 20 27 150 180 6 60 50 1 1 V V MHz pF 240 min typ max 50 50 Unit A A V V
Emitter to base voltage Forward current transfer ratio Base to emitter voltage Collector to emitter saturation voltage Transition frequency Collector output capacitance
*h FE1
Rank classification
Q 60 to 140 P 100 to 240
Rank hFE1
1
Power Transistors
PC -- Ta
40 1.6 (1) TC=Ta (2) With a 100 x 100 x 2mm Al heat sink (3) Without heat sink (PC=2W) (1) TC=25C 1.4 IB=20mA
2SD1772, 2SD1772A
IC -- VCE
4 VCE=10V
IC -- VBE
Collector power dissipation PC (W)
35 30 25 20 15 10 5 (3) 0 0 20 40 (2)
Collector current IC (A)
1.2 1.0 10mA 0.8 0.6 4mA 0.4 2mA 0.2 0 1mA 8mA 6mA
Collector current IC (A)
3 25C 2 TC=100C -25C
1
0 0 4 8 12 16 20 24 0 0.4 0.8 1.2 1.6
60
80 100 120 140 160
Ambient temperature Ta (C)
Collector to emitter voltage VCE (V)
Base to emitter voltage VBE (V)
VCE(sat) -- IC
Collector to emitter saturation voltage VCE(sat) (V)
10 IC/IB=10 1000
hFE -- IC
1000 VCE=10V
fT -- IC
VCE=10V f=1MHz TC=25C
Forward current transfer ratio hFE
3 TC=100C
300
TC=100C 25C
Transition frequency fT (MHz)
0.3 1 3
300 100 30 10 3 1 0.3 0.1 0.01 0.03
1
100
-25C
0.3
25C -25C
30
0.1
10
0.03
3
0.01 0.01
0.03
0.1
0.3
1
3
1 0.01
0.03
0.1
0.1
0.3
1
3
10
Collector current IC (A)
Collector current IC (A)
Collector current IC (A)
Area of safe operation (ASO)
10 3 ICP 102 Non repetitive pulse TC=25C
Rth(t) -- t
(1) Without heat sink (2) With a 100 x 100 x 2mm Al heat sink (1)
Collector current IC (A)
1 0.3 0.1 0.03 0.01 0.003 0.001 1
IC 1ms 10ms DC
Thermal resistance Rth(t) (C/W)
t=0.5ms
10
(2)
1
10-1
2SD1772A
2SD1772
3
10
30
100
300
1000
10-2 10-4
10-3
10-2
10-1
1
10
102
103
104
Collector to emitter voltage VCE
(V)
Time t (s)
2
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR

▲Up To Search▲

Price & Availability of 2SD1772A

	To Download 2SD1772A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .